Zoom MultiStomp MS-50G Operation Manual page 5

Parameter knobs
From the left
Parameter knob 1 [
Turn left and right to adjust the parameter.
Press to open the MENU where you can remove and
rearrange effects and make various settings (!P12, 18).
You can also check the firmware version (!P22).
Parameter knob 2 [
Turn left and right to adjust the parameter.
Press to open the MEMORY screen where you can
select and save patch memories, and change patch
memories using the footswitch (!P10, 11).
Parameter knob 3 [
Turn left and right to adjust the parameter.
Press to change the parameter page (!P9).
]
]
]
Cursor keys
Up and down cursor keys [
Press to change the effect type.
Press and hold for 1 second to select the effect category
(!P8).
Left and right cursor keys [
Press to show the effect to the left or right.
Press and hold for 1 second to add a new effect left or
right of the current effect (!P12).
/ ]
/ ]
5
Part Names