Tapping The Tempo - Zoom MultiStomp MS-50G Operation Manual

Delay effects and some modulation and filter effects can
be synchronized to the tempo. Select an effect that can be
synchronized, and set its Time, Rate or other parameter that
can be synchronized to a or note value.
The tempo can be set by tapping the footswitch or a knob.
To set the tempo by tapping the
1
footswitch
NOTE
when pressed and held, the footswitch
is set to activate the Tuner. To tap the tempo with
the footswitch, the setting must be changed so that
it activates Tap Tempo when pressed and held.
(See page 18.)
Open the Tap Tempo Screen.
1.
Press
and
hold
16

Tapping the Tempo

for 1 second
2. Tap the footswitch 2 or more times at the
desired tempo.
The ON/OFF indicator flashes in time with the
tempo.
3. Complete the setting.
Press
and
hold
for 1 second
NOTE
the ON/OFF indicator becomes unlit and the effect
turns OFF for 1 second.