Download  Print this page

Random Play; Repeat Play - Sharp DK-KP80P Operation Manual

Slim micro system
Hide thumbs

Advertisement

Table of Contents
Listening to a CD or MP3/WMA disc (continued)
A. For example, to choose 13
1
Press the "10+" button once.
2
Press the "1" button.
3
Press the "3" button.
B. For example, to choose 130
1
Press the "10+" button twice.
2
Press the "1" button.
3
Press the "3" button.
4
Press the "0" button.
Notes:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
To stop playback:
● Press the
(CD
) button.
■ Various disc functions
Function
Main
Remote
unit
control
Play
Pause
Stop
Track
up/
down
Fast
forward/
reverse

■ Repeat play

Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until "Repeat One"
appears. Press the
/ (CD
To repeat all tracks:
Press the PLAY MODE button repeatedly until "Repeat All"
appears. Press the
/ (CD
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play" section on page 7
and then press the PLAY MODE button repeatedly until
"Repeat All" appears.
To cancel repeat play:
Press the PLAY MODE
button repeatedly until
"Normal" appears and
"
" disappears.
Caution:
After performing repeat play, be sure to press the
button. Otherwise, the disc will play continuously.
Selected track number
Operation
Press in the stop mode.
Press in the playback
mode. Press the
/
button to resume
playback from the
paused point.
Press in the playback
mode.
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
/ ) button.
/ ) button.
(CD )
■ Programmed play (CD)
You can choose up to 32 selections for playback in the order
you like.
1
While in the stop mode, press the MEMORY button on the remote
control to enter the programming save mode.
2
Press the numeric
button or
or
buttons on the remote
control to select the
desired track.
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks, press the
MEMORY button repeatedly. If you make a mistake, the programmed
tracks can be cleared by pressing the CLEAR button.
5
Press the
/ (CD

■ Random play

The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold the PLAY MODE button on the remote control
until "Random" appears. Press the
To cancel random play:
Press the PLAY MODE
button again. "RDM"
indicator will disappear.
Notes:
● If you press the
move to the track selected next by the random operation.
On the other hand, the
move to the previous track. The beginning of the track
being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
■ Programmed play (MP3/WMA)
1
While in the stop mode, press the MEMORY button to
enter the programming save mode.
2
Press the PRESET (
or
) button on the
remote control to select
the desired folder.
Then press the
button on the
remote control to select
the desired tracks.
3
Press the MEMORY button to save the folder and track
number.
4
Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
5
Press the
/ (CD
To cancel the programmed play mode:
During programmed stop mode, press the
button. The display will show "Memory Clear" and all the
programmed contents will be cleared.
E-8
Selected track number
/ ) button to start playback.
/ (CD
/ ) button.
button during random play, you can
button does not allow you to
or
/ ) button to start playback.
(CD
)

Advertisement

Table of Contents
loading

  Related Manuals for Sharp DK-KP80P