Enable/Disable The Rear Park Assist System - Jeep Automobile Owner's Manual

144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Enable/Disable the Rear Park Assist System

The Rear Park Assist System can be enabled and disabled
with a switch located in the switch bank of the instru-
ment panel.
Rear Park Assist Switch
When the switch is pressed to disable the system, the
instrument cluster will display the PARK ASSIST DIS-
ABLED message. Refer to "Electronic Vehicle Informa-
tion Center (EVIC)" in Section 4 of this manual. When the
shifter is changed to R (Reverse) and the system is
disabled, the instrument cluster will actuate a single
chime, once per ignition cycle, and it will display the
message.
The Rear Park Assist Switch LED will be ON when the
Rear Park Assist System is disabled or defective. The
Rear Park Assist Switch LED will be OFF when the
system is enabled.