Enable/Disable The Rear Park Assist; Service The Rear Park Assist - Jeep 2009 Commander Owner's Manual
Hide thumbs
Also See for 2009 Commander:
- Quick reference manual (12 pages) ,
- Owner's manual (519 pages) ,
- Warranty information booklet (51 pages)
Table of Contents
Advertisement
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Enable/Disable The Rear Park Assist
The Rear Park Assist can be enabled and disabled with a
switch located on the upper switch bank of the instru-
ment panel.
Rear Park Assist Switch
When the switch is pressed to disable the system, the
instrument cluster will display the "PARK ASSIST DIS-
ABLED" message. Refer to "Electronic Vehicle Informa-
tion Center (EVIC)" in Section 4 of this manual. When the
shift lever is changed to REVERSE and the system is
disabled, the instrument cluster will actuate a single
chime, once per ignition cycle, and it will display the
message.
The Rear Park Assist Switch LED will be ON when the
Rear Park Assist is disabled or defective. The Rear Park
Assist Switch LED will be OFF when the system is
enabled.
Service The Rear Park Assist
When the Rear Park Assist is defective, the instrument
cluster will actuate a single chime, once per ignition
cycle, and it will display the "SERVICE PARK ASSIST
SYSTEM" message. Refer to "Electronic Vehicle Informa-
tion Center (EVIC)" in Section 4 of this manual.
Advertisement
Chapters
Table of Contents
