Instrument Panel And Interior Lights; Daytime Running Lights - Canada Only; Lights-On Reminder - Jeep Automobile Owner's Manual

headlights to remain on longer (closer to the vehicle).
Also, dirt, film, and other obstructions (sticker, toll box,
etc.) on the windshield or camera lens will cause the
system to function improperly.

Instrument Panel and Interior Lights

When the multi-function control lever is in the parklight,
headlight, or A (Auto) position (if equipped), rotating the
center portion of the lever up and down will increase and
decrease the brightness (dimmer control) of the instru-
ment panel lights. Full daytime brightness on all elec-
tronic displays (odometer, overhead console, radio, and
Automatic Climate Control (if equipped) is obtained by
rotating the center portion of the control to the first
detent above the dimmer range. Rotating the control to
the second detent above the dimmer range turns the
interior lights on. Rotating the control to the "Off"
(extreme bottom) position disables all the interior lights,
even when the doors and liftgate are open. While in the
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125
"Off" position the instrument panel lighting is at the
lowest light level and may not be suitable for night
driving.
Daytime Running Lights — Canada Only
The high beam headlights come on at a low intensity
level whenever the engine is running, and the transmis-
sion is not in the P (Park) position. The lights remain on
until the ignition switch is turned OFF or the parking
brake is engaged. The headlight switch must be used for
normal night time driving.

Lights-On Reminder

If the headlights or parking lights are on after the ignition
is turned OFF, a chime will sound when the driver's door
is opened.
3