Parking Brake - Jeep Automobile Owner's Manual

274 STARTING AND OPERATING

PARKING BRAKE

To set the parking brake, pull the lever up as firmly as
possible. When the parking brake is applied with the
ignition ON, the "Brake Warning Light" in the instru-
ment cluster will light. To release the parking brake, pull
up slightly, press the center button, then lower the lever
completely.
NOTE: The instrument cluster "Brake Warning Light"
indicates only that the parking brake is applied. It does
not indicate the degree of brake application.
Parking Brake
Be sure the parking brake is firmly set when parked and
the gear shift lever is in the P (Park) position. When
parking on a hill, you should apply the parking brake
before placing the gear shift lever in P (Park), otherwise
the load on the transmission locking mechanism may
make it difficult to move the selector out of P (Park).