Jeep Automobile Owner's Manual page 131

Adjustable Pedal Switch
Press the left side of the button to move the pedals
rearward (toward the driver).
Press the right side of the button to move the pedals
forward (away from the driver).
• The pedals can be adjusted with the ignition OFF.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131
• The pedals can be adjusted while driving.
• The pedals cannot be adjusted when the vehicle is in R
(Reverse) or when the Speed Control is ON. A message
will be displayed in the Electronic Vehicle Information
Center (EVIC) if the pedals are attempted to be ad-
justed when the system is locked out ("Adjustable
Pedal Disabled — Cruise Control Engaged" or "Ad-
justable Pedal Disabled — Vehicle In Reverse"). Refer
to Electronic Vehicle Information Center (EVIC) in
Section 4 for more information.
CAUTION!
Do not place any article under the adjustable pedal's
or impede its ability to move as it may cause damage
to the pedal controls. Pedal travel may become
limited if movement is stopped by an obstruction in
the adjustable pedal's path.
3