Jeep Automobile Owner's Manual page 83

• After the Ready prompt and the following beep, say
the name of the person you want to call. For example,
you can say John Doe, where John Doe is a previ-
ously stored name entry in the UConnect
book. Refer to Add Names to Your UConnect Phone-
book, to learn how to store a name in the phone book.
• The UConnect system will confirm the name and
then dial the corresponding phone number, which
may appear in the display of certain radios.
Add Names to Your UConnect Phonebook
NOTE: Adding names to phone book is recommended
when vehicle is not in motion.
• Press the "Phone" button to begin.
• After the Ready prompt and the following beep, say
Phonebook New Entry.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83
• When prompted, say the name of the new entry. Use of
long names helps the voice recognition and it is
recommended. For example, say Robert Smith or
phone Robert instead of Bob.
• When prompted, enter the number designation (e.g.,
Home, Work, Mobile, or Pager ). This will allow
you to store multiple numbers for each phone book
entry, if desired.
• When prompted, recite the phone number for the
phone book entry that you are adding.
After you are finished adding an entry into the phone
book, you will be given the opportunity to add more
phone numbers to the current entry or to return to the
main menu.
3