Ignition Key Removal - Jeep Automobile Owner's Manual

14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Ignition Key Removal

Place the selector lever in "P" (Park). Turn the key to the
LOCK position, and remove the key.
NOTE:
• If you try to remove the key before you place the
selector lever in "P" (Park), it may become trapped
temporarily in the ignition switch. If this occurs, rotate
the key to the right slightly, then remove the key as
described. If a malfunction occurs, the system will trap
the key in the ignition switch to warn you that this
safety feature is inoperable. The engine can be started
and stopped, but the key cannot be removed until you
obtain service.
• For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), the power window
switches, radio, power sunroof (if equipped), and
power outlets will remain active for up to 60 minutes
after the ignition switch is turned to the LOCK posi-
tion. Opening either front door will cancel this feature.
The time for this feature is programmable. For details,
refer to "Delay Power Off to Accessories Until Exit,"
under "Personal Settings (Customer Programmable
Features)," under "Electronic Vehicle Information
Center (EVIC)" in Section 4 of this manual.
WARNING!
Never leave children alone in a vehicle. Leaving
children in a vehicle unattended is dangerous for a
number of reasons. A child or others could be seri-
ously or fatally injured. Don't leave the keys in the
ignition. A child could operate power windows,
other controls, or move the vehicle.