Jeep Automobile Owner's Manual page 81

Cancel Command
At any prompt, after the beep, you can say Cancel and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) UConnect System to a Cellular Phone
To begin using your UConnect system, you must pair
your compatible Bluetooth™ enabled cellular phone.
To complete the pairing process, you will need to refer-
ence your cellular phone owner's manual. The
UConnect website may also provide detailed instruc-
tions for pairing.
The following are general phone to UConnect System
pairing instructions:
• Press the "Phone" button to begin.
• After the Ready prompt and the following beep, say
Setup Phone Pairing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81
• When prompted, after the beep, say Pair a Phone and
follow the audible prompts.
• You will be asked to say a four-digit pin number,
which you will later need to enter into your cellular.
You can enter any four-digit pin number. You will not
need to remember this pin number after the initial
pairing process.
• For identification purposes, you will be prompted to
give the UConnect system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
• You will then be asked to give your cellular phone a
priority level between 1 and 7, 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnect system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect System. The priority allows the
UConnect system to know which cellular phone to
3