Table of Contents
Advertisement
E V E R F O C U S
E L E C T R O N I C S
Network Setting Menu
Diagram fourteen is a screen shot of the Network Setting Menu. This menu is for
setting up the configuration for networking to the DVR. Please refer to the
Networking Chapter of this manual to fully understand how to setup your network for
this DVR. In the Network Setting Menu the following fields are defined as follows:
IP Address: This field is to set a static IP Address for the DVR. A static IP
address is an IP address whose value does not change. Everfocus suggest
using a static IP address. If your Internet provider does not offer a static IP
address you have the option to use a dynamic IP address. For Example: A
Test IP address given to the machine by our engineers is 192.168.010.010.
Please Note: The Addresses in the machine are for our own testing
you must apply your own addresses to comply with your network.
Refer to Networking Chapter for more details.
To change this, simply use the Jog Dial on the DVR. Press the Enter key
to make your selection.
C O R P O R A T I O N
Diagram 14
28
Advertisement
Table of Contents
