Removing The Mdc Modem Module - Packard Bell EasyNote T5 SEries Disassembly Manual

3. Unscrew the four screws on both sides of the hard disk drive as shown in Fig. 4

Removing the MDC Modem Module

To remove the MDCmodem module, first remove the hard disk drive (see
Disk Drive), then perform the following steps:
1. Remove the screw shown in Fig. 5
2. Carefully lift up MDC modem module.
3. Disconnect the cable attached to the MDC modem and put the modem aside.
Fig. 3 Disconnecting the hard disk drive
Fig. 4 Unscrewing the hard disk drive bracket screws
Fig. 5 Removing the screws on the MCD modem
Packard Bell EasyNote T5 Disassembly Manual
Removing the Hard
M3x4 Black
M2.5x3.5 Sliver
Page 6