Modem Board; Rj11 Connector - Packard Bell EasyNote SJ Disassembly Manual

1818181818
2. Clear the cable and remove the standby switch.

Modem Board

To remove the modem board, first remove the top cover (see
following steps:
1. Remove the 2 screws securing the modem (see
2. Take out the modem; it has been clicked onto the main board.
3. Disconnect the cable from the modem.

RJ11 Connector

To remove the RJ11 connector, first remove the top cover (see
the following steps:
Fig. 29 Location of standby switch screw.
B
Fig. 30 Location of standby switch screw.
Packard Bell EasyNote SJ Disassembly Manual
Top Cover), and then perform the
Fig. 30-A).
Top Cover), and then perform
18
A