Sharp HT-SL50 Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Home Theater System
  5. HT-SL50
  6. Operation manual

Sharp HT-SL50 Operation Manual

Sound bar home theater system
Hide thumbs Also See for HT-SL50:

Advertisement

Table of Contents

See also: Operating Manual
MODEL
HT-SL50
SOUND BAR HOME THEATER SYSTEM
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP product.
HT-SL50 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
Notes:
●
This product is recommended for flat panel TV (LCD and plasma).
●
For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
●
This product is controlled via HDMI CEC (Consumer Electronics Control) specification, therefore
for HDMI connection, your TV's CEC must be enabled.
●
For TV without HDMI CEC, headphone or RCA (variable output) analog connection is available.
●
For TV without HDMI, headphone or RCA (variable output) connection is required.
Recommended Connection:
TV Type
with HDMI
( ver1.4 with ARC)
with HDMI
HDMI TV without
CEC & ARC or non
HDMI TV
TINSZA935AWZZ

OPERATION MANUAL

CEC FUNCTION
MUST BE ENABLED
MUST BE ENABLED
NONE
CONNECTION
HDMI IN
(ARC)
HDMI IN
HEADPHONE OUT
RCA
(VARIABLE OUT)
ENGLISH
CONNECTION METHOD
Page 10, Method 1
Page 11, Method 2
Page 12, Method 1
Page 12, Method 2
Printed in Malaysia
11C R AS 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT-SL50 and is the answer not in the manual?

Questions and answers

Related Manuals for Sharp HT-SL50

Summary of Contents for Sharp HT-SL50

  • Page 1: Operation Manual

    HT-SL50 SOUND BAR HOME THEATER SYSTEM Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. HT-SL50 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.

  • Page 2: Special Notes

    Accessories Please confirm that only the following accessories are included. RCA to headphone cable Subwoofer Stand x 2 (1pin - 2 pins) x 1 (GITAUA004AW01) (QCNWGA064AWPZ) Wall Mount Angle x 2 Pattern Paper (LANGKA225AW01) (TCAUHA026AWZZ) Special Notes CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

  • Page 3: Important Safety Instructions

    Special Notes (continued) WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. Special Notes Important Safety Instructions Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
  • Page 4 Important Safety Instructions (continued) Additional Safety Information 15) Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

  • Page 5: For U.s. Customer Only

    Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.
  • Page 6 Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is 4"...

  • Page 7: Controls And Indicators

    5. Left Front Speaker terminal (White/Black) ..9 REAR VIEW ACTIVE SUBWOOFER SYSTEM HT-SL50 Reference page 5. HDMI Input Jack ......11 6.

  • Page 8: System Preparation

    Do not let children dangle on the sound bar once it is attached on the wall as it can cause damage and injury. Driving screws SHARP designed the sound bar so you may hang them on the wall. Use proper screws (not supplied). See below for size and type.

  • Page 9: Falling Prevention

    System preparation (continued) Fixing wall mount angle Fix the pattern paper to the wall in horizontal position as below. 30 mm 523 mm Wall surface 30 mm Pattern paper Make a hole on the wall following the screw point marks on the pattern paper by using a drill. 1-1/4"...

  • Page 10: Placing The System

    The front panel of the speaker is not removable. Caution: ● Do not change the installation direction when the unit is turned on. Placing the stand Place the stand as shown. ACTIVE SUBWOOFER SYSTEM HT-SL50 SUBWOOFER SYSTEM ACTIVE SUBWOOFER SYSTEM HT-SL50 Right Left White ●...
  • Page 11 To listen to the sound from TV, some setting in the TV menu is needed. For details refer to the operation manual of the ● If unable to select external speaker (for Sharp LCD TV, it is named as AQUOS AUDIO SP), turn OFF and ON the CEC. ●...
  • Page 12 System connections (continued) 2. Method 2 This connection is for HDMI TV without ARC (Audio Return Channel). To HDMI output terminal To HDMI terminal To HDMI input terminal E-11 DVD, Blu-ray disc player or similar To HDMI output terminal...
  • Page 13 System connections (continued) Connecting a TV (with AUDIO IN (TV)) Connect to the TV using an audio cable. 1. Method 1 To HEADPHONE terminal Audio cable Subwoofer To AUDIO IN (TV) input terminal 2. Method 2 To audio output terminal RCA cable Subwoofer To AUDIO IN (TV)

  • Page 14: General Control

    General Control Make sure to enable the HDMI CEC when making HDMI connection. To turn the power on Plug the AC power cord into an AC outlet, the stand-by indicator turns red. This unit will automatically power on if: 1. TV or similar component which supports HDMI CEC, is turned on.

  • Page 15: Troubleshooting Chart

    Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. General Symptom Possible cause ●...

  • Page 16: Specifications

    Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There maybe some deviations from these values in individual unit.

Table of Contents