Reversing The Door Swing - GE GTH18DCXALWW Owner's Manual And Installation Instructions

Top-freezer refrigerator model 18
Table of Contents

Advertisement

Available languages

Available languages

Installation instructions
iNSTALLiNG THE WATER LiNE
(CONT.)
[-gqPLUG iN THE REFRIGERATOR
Arrange
the coil of tubing so that it does not vibrate
against the back of the ref_igerator
or against the
wall. Push the ref}igerator
back to the wall.
START THE ICEMAKER
On power switch models, set the icemaker
power
switch to the ! (on} position.
On feeler arm models,
move the feeler arm to the ON (down) position.
The icemaker
will not begin to operate
until it
reaches its operating temperature
of 15°F (-9°C) or
below. It will then begin operation
automaficall>
Feeler A rm in
the OR (down)position
NOTE:
In lower water
pressure
conditions,
the
water
valve may ttun
on up to 3 times
to deliver
enough
water
to the icemaker.
REVERSING THE DOOR SWING
IMPORTANT
NOTES
When reversing the door swing:
* Read the instructions
all the way through
before
starting.
* Handle
parts carefully to avoid scratching
paint.
* Set screws down by their related parts to avoid using
them in the wrong places.
* Provide a non-scratching
work surface for
the doors.
IMPORTANT: Once you begin, do not move the
cabinet
until door-swing reversal is completed.
These instructions
are for changing
the binges f}om
the right side to the lef_ side--if you ever want to change
the binges back to the right side, follow these same
instructions
and reverse all references
to left and right.
Unplug the refrigerator
from its electrical
outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
Phillipsscrewdriver
Masking tape
3/8" Headsocketdriver
(a 6-pointsocket is
recommended)
Puttyknife or
thin-bladescrewdriver
T20or T25Torx ce
driver,whicheveryour
modelrequires
14

Advertisement

Table of Contents
loading

Table of Contents