Advertisement
DRILL-DRIVER
Chuck
Motor
Gear Train
Switch
No Load Speed
Clutch
Maximum Torque
CHARGING
ASSEMBLY
Rating
Charging Voltage
Charge Rate
BATTERY
PACK
315.113320
3/8 in. Keyless
DC Motor 12 Volt
Two Speed
Variable Speed
0-300 RPM (Low)
0-1000 RPM (High)
24 Positions
210 in./Ibs
Item No. 9 11055
(1425004)
120 V, 60 Hz, AC only
12 Volt
3-6 Hours
Item No. _911057
(1322519)
315.113330
3/8 in. Keyless
DC Motor 14.4 Volt
Two Speed
Variable Speed
0-400 RPM (Low)
0-1400 RPM (High)
24 Positions
290 in./Ibs
Item No. _911006
(1425005)
120 V, 60 Hz, AC only
14.4 Volt
3-6 Hours
Item No. _911007
(1323407)
KNOW
YOUR DRILL-DRIVER
_ee FigureI.
Before attempting to use your drill-driver, familiarize
yourself with all operating features and safety
requirements.
KEYLESS
CHUCK
Your drill-driver has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
SWITCH
To turn your drill-driver ON, depress the switch trigger.
Release switch trigger to turn your drill-driver OFF.
SWITCH
LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
VARIABLE
SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
TWO SPEED
GEAR TRAIN
Your drill-driver has a two speed gear train designed for
drilling or driving at HI or LO speeds. A slide switch is
located on top of your drill to select either HI or LO speed.
FORWARD/REVERSE
SELECTOR
(DIRECTION
OF ROTATION SELECTOR)
Your drill-driver has a forward/reverse
selector located
above the switch trigger.
WRIST
STRAP
A wrist strap is provided to reduce the chances of dropping
your drill-driver. Place one hand through the wrist strap
when carrying tool.
BIT STORAGE
When not in use, bit(s) provided with your drill-driver can
be placed in the storage area located on the bottom of the
motor housing.
LEVEL
To keep drill bit level during drilling operations, a level is
located on the back of the motor housing.
d_k WARNING:
If any parts are missing, do not operate
your drill-driver until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
7
Advertisement
