Craftsman 486.24221 Owner's Manual page 9

STEP 11:
(SEE
FmGURE 15 AND
16)
, Turn the second rear hopper tube so that the brace
holes in the middle of the tube face up. Assemble
the ends of the rear hopper tube onto the ends of the
lower hopper side tubes. Fasten together using plastic
plugs (CO).
STEP 12: (SEE FIGURE 17 AND 18)
, insert the bag frame strap into the stitched sleeve
along the front edge of the bag bottom.
Assemble the bag frame strap to the lower hopper
side tubes using two 1/4" x 1ol/8" clevis pins (T) and
3/32" hair cotter pins (R).
LOWER
HOPPER
StDE TUBE
FIGURE 15
REAR HOPPER TUBE
(brace holes on top}
PLASTmO PLUG (CO)
1/4" × 1ol/8"
CLEVmS PIN (T)
FIGURE 17
Place the assembled lower hopper tubes into the
bottom of the hopper bag
Attach the ends of the lower hopper side tubes to the
inside of the upper hopper side tubes using two 3/8"
x 1/2" clevis pins (S) inserted from the inside, and two
3/32" hair cotter pins (R).
\
\
UPPER HOPPER
SiDE TUBE
3/32" RAmP
COTTER PmN (R)
LOWER HOPPER
SiDE TUBE
c?
3/8" x 1/2"
CLEVIS PmN (S)
FIGURE 16
HOPPER BAG
BOTTOM
Secure the bag corners around the lower hopper side
tubes by snapping the bag flaps to the bag bottom on
both sides.
SNAP
FIGURE 18