Parts List - Craftsman Professional 320.27311 Operator's Manual

PARTS LIST
Fig.
1. Saw
2. Blade
(InstaLledat factory)
3oEdge Guide 1[/
(stored in case) /11
4_ Blade Wrench I_ I
(stored in case) _lU
5. Laser enhancing
safety glasses O,' "_tf
(for enhancing laser)
6oOperator's Manual
KNOWYOUR CIRCULAR SAW (Fig. 2)
NOTE: Before attempting to use your saw, familiarize yourself with all of the
operating features and safety requirements°
Your circular saw has a precision-built electric motor and it should only be connected to a
120-volt, 60-Hz AC ONLY power supply (normal household current)_.DO NOT operate on
direct current (DC)_ This large voltage drop will cause a loss of power and the motor will
overheat, If the saw does not operate when plugged into correct 120-volt, 60-Hz AC ONLY
outlet, check the power supply. The saw has an 8-if., 2-wire power cord (no adapter needed},
This Circular Saw has the following features:
t 15 Amp, 5200 RPM (no-load speed) motor° Provides power and torque for fast, sure
cuts in wood, plywood, hardboard and wood-base materials_
2 LaserTracTMThe unique, innovative feature for accurate, efficient cutting!
3 Built-in LED WORKLtGHT illuminates curling area for easy visibility This light stays
"On" when saw is plugged into power source
4 Quick depth-of-cut adjustments with a maximum depth of cut:
2 318-in,thick at 90; 113hs-in, thick at 45 °
5, Easy to read bevel cut scale adjusts from 0° to 56 ° bevel capacity, with a positive
stop at 45°
6. Heavy duty, lightweight Magnesium blade guards for extra strength and durability
7_ Extended length trigger switch with soft-start for maximum control and comfort
for either left or right hand.
8_ Oversized machined magnesium base provides stability for maximum control
during sawing applications.
9 Soft-grip ergonomicaily designed contoured rear handle and front assist handle
for positive gripping, control, balance and comforL
10 Includes Craftsman e 24 tooth carbide-tipped steel general purpose blade
for fast, smooth cuts
13