Getting To Know Your Belt And Disc Sander - Craftsman 113.226431 Owner's Manual

i !i i i ¸
getting to know your belt and disc sander
4
TENSION
LEVER
6
AUXILIARY
MOUNTING HOLE WORK SUPPORT
HEX SCREW
BED 2
/ BED LOCKING
3 SOCKET
TRACKING HEAD SCREW
KNOB
5
TABLE LOCK
KNOB
3
HOLE
1
WORK SUPPORT
SANDING
/ BELT
SANDING
PLATE
SANDING
DISC
WORKTABLE
ASSEMBLY
WARNING: To avoid Injury from accidental start,
turn switch "OFF" and remove plug from power
source outlet before making any adjustments.
1. Work Support. Supports the workpiece onthe sand-
ing belt.
2. Hex Socket Head Screw. Loosening screw allows
belt bed to be raised to the vertical position.
3. Tracking Knob. Turning knob counterclockwise
causes sanding belt to move towards the disc; turning
knob clockwise causes sanding belt to move away
from the disc.
DISC
GUARD
7 ",
ON-OFF MOUNTING
SWITCH HOLE
1
5.
6.
Tension Lever. Sliding lever to the right releases the
sanding belt tension; sliding lever to the left applies
belt tension.
Table Lock Knob. Loosening knob allows the work-
table to be tilted for bevel sanding. (Scale pointer on
table trunnion; scale attached to base.)
Auxiliary Mounting Hole. Allows table assembly to
be mounted for end sanding when the bed is placed
in vertical position.
7. On-Off Switch.
12