Craftsman Professional 315.228510 Owner's Manual page 16

C
WARNING
When Mounting an Auxiliary Fence Face, Position Mounting Hardware Beyond Arrow at Right and Left as indicated.
Keep Fasteners Away From Blade. I
D
Do Not Li.ft Saw With Rails
or Extension Tables.
F
A WARNING
• Attach Blade Guard
Assembly Before
Operating this Saw
H
_" Read Owners /
A WARNING
Debris on rail can misalign
the rip fence. Workpiece
could bind or suddenly
kick back. You could be
hit or cut. Clean debris
off fence rail before
positioning fence.
G
Turn Clockwlsa to
Increase Blade
Angle.
Turn Clockwise to Raise
Blade,
Turn Counterclockwise to
Lower Blade.
WARNING
For your safety, read owners manuel before
operating saw.
Wear eye protection.
Keep blade guard down and In place for through
cuts.
Keep hands out of path of saw blade.
Do not perform any operation freehand.
Know how to reduce the risk of kickback.
See instructions for ripping.
• Never reach around or over saw blade.
• When ripping, use push stick when fence is set
2 Inches or less from blade.
• When ripping, usa push block and auxllary fence
when fence is set between 1/2 end 2 Inches from
blade. Do not make rip cuts narrower than 1/2 Inch.
• Turn off tool and wait for saw blade to stop before
moving workplece or changing settings.
• Disconnect the saw from the power source before
changing blade or servicing.
• Do not expose to rain or use in damp places.
Fig. 4 b
[RRFTSMRW TABLE SAW315.228510 16