Using The Oven Controls - GE JGSP28 Owner's Manual

Usingthe oven controls.
Throughout this manual, features and appearance may vary from your model.
OVEN _//_
CONTROLS
S +AN_ND H(
TIME CO_
:_ 3 SECONDS __
10
Oven Control, Clock and Timer Features and Settings
O AKE/TENPRECALL Pad 0
Touch this pad to selectthe bakefunction.
BAKELight
Flashes whilein edit mode-you canchange
the oventemperatureat this point.Glowswhen
the ovenis in bakemode.
O START/ON Pad
lust be touched to start any cooking or
cleaning function.
0 Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or self-
cteaning mode and the times set for the timer
or automatic oven operations. The display will
show "PrE" while preheating. When the oven
reaches the selected temperature, the oven
control will beep and the display witt show the
oven tem perature.
Function Error Code
If "F- and a number or letter" flash in the disptoy and
the oven control signals, this indicates a function
error code.
if the function error code appears during the self
cleaning cycle, check the oven door latch. The latch
handle may hove been moved, even if onty slightly,
from the latched position. Hake sure the latch is
moved to the right as far as it wilt go.
Touch the CLEAR/OFFpod. Allow the oven to cool
for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power to
the range and call for service.
0
0
0
O
KITCHEN TIP1ER ON/OFF Pad
Touch this pad to select the timer feature.
Then press + and - pads to adjust time.
TIMER Light
Flasheswhile in edit mode-you con change
the set time at this point. Glowswhen the timer
has been activated. Flashes again when the
time has run out until the control is reset.
CLOCK Pad
To set dock, touch this pad twice and then
touch the + and - pads, The time of day will
flash in display when oven is first turned on.
STARTTIME Pad
Usealong with the COOKING TIlE or SELF
CLEAN pads to set the oven to start end stop
automatically at o time you set.
STARTTIME Time Light
Flasheswhile in edit mode-you can change
the start time set time at this point. Gbws when
the function has been activated.
COOKING TIME Pod
Touch this pad and then touch the + or -
pads to set the amount of time you wont your
food to cook. The oven will shut offwhen the
cooking time has run out.
COOKING TIME Light
Flasheswhile in edit mode-you can change set
time at this point. Glows when function has
been activated. Flashesagain when the time
has run out until the control is reset.
AUTOMATIC OVEN Light
This lights anytime the oven has been
programmed using the COOKINGTtMEor
STARTTIMEfunctions,