Racks; Storage Drawer - GE JGSP28 Owner's Manual

Care and cleaning of the range.
Oven Light Replacement
[ifincluded)
CAUTION: e ore replacing
your ovenlight bulb, disconnect the
electrical power
to the range at the main fuse or circuit
breaker panel.
Be sure to let the light cover and bulb cool
completely,
To remove the cover:
[_ Twist lens counterdod_wise about a
quarter turn to remove.
1-_ Replace bulb with a 40-watt
appliance bulb or two-prong halogen
bulb as appropriate.
To replace the cover:
171 Line up tabs of lens in front of tabs on
housing and rotate clockwise to
engage.
_] Connect elecWicolpower to the range.
Donot removeany screwsto remove
the cover.
Storage Drawer Removal
To remove the drawer:
[_ Pullthe drawer out until it stops.
[] Lift the front of the drawer until the
stops dear the guides.
[_ Remove the drawer.
To replace the drawer'.
[_ Place the drawer rails on the guides.
r_ Push the drawer back until it stops.
[_] Lift the front of the drawer and push
back until the stops clear the guides,
[_] Lower the front of the drawer and
push back until it closes.
ovenrack
Oven Racks
All oven racks may be cleaned by hand
with an abrasive cleaner or steel wool,
After cleaning, rinse the racks with clean
water and dry with a dean cloth, Gray
porcelaimcooted oven racks may remain
in the oven during the self-cleaning cycle
without being damaged. The shiny, silver-
colored oven racks may remain in the oven
during the setficleoning cycle, but they will
lose their Iuster and become hard to slide.
it wilt be necessary to grease all oven rack
side edges with a light coating of vegetable
oil after cleaning them by hand or in the
oven. This will help maintain the ease of
sliding the racks in and out of the oven,
24