GE JGSP28 Owner's Manual page 28

Beforeyou
callfor
service...
Troubleshooting Tips
Possible Causes What To Do
Oven controls improperly set. • See the Using the oven section.
Rack position is incorrect • See the Using the oven section.
or the rack is not level.
Incorrect cookware or • See the Using the oven section,
cookware of improper
size being used.
Oven thermostat needs • See the Adjust the oven thermostat - Do it yourselfl
adjustment, section.
Oven controls improperly set. * Hake sure you touch the BROIL HI/LO pad,
Improper rack position • See the Broiling Guide,
being used.
In some orens the power
{voltage] may be low.
Oven thermostat
'to'!e_ho_f:_ito_i_id_!i:i::i ii:i needs adjustment.
::_:_e_d_!_i:_kedi_i!:: :: The door is out of position,
Rear drawer support is
on top of the guide rail,
5_o(ag_i:d_aWe_ii:::i:ii::::_:: Rear drawer supportis
on top of the guide rail.
• For best resuits, use a pan designed for broiling.
° Preheat the broit element for ZOminutes.
° 8rail for the tongest period of time recommended in
the Broiling Guide,
• See the Adjust the oven thermostat - Do ityourselfi
section.
° Because the oven door is removable, it sometimes
gets out of position during installation. Remove and
replace the oven door. See the Lift-Off Oven Door
section.
• Reposition the drawer. See the Storage Drawer
Removal instructions in the Core and cleaning of your
range section.
• Reposition the drawer. See the Storage Drawer
Removal instructions in the Core and cleaning of
your range section,
28