Advertisement
Available languages
Available languages
Care and Cleaning
Custom Hood Insert
Stainless
steel hood
surfaces
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm
sudsu water or a stainless steel cleaner or polish.
Always wipe the surface in the direction of the
grain. Follow the cleaner instructions for cleaning
the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest gou, please call our toll-free
number:
National
Parts Center
800.626.2002
monogram.com
Light bulbs
To change the light bulbs:
1. Grasp the outer trim ring and twist until reaching
the unlock position. Then pull the ring straight out.
2. Grasp the bulb and twist until reaching the unlock
position. Then gentlu pull the bulb straight out.
3. Replace with the same wattage, tgpe and size
bulb. Wear gloves. Do not touch bulb with gour
bare fingers.
These 120 volt, 50 watt halogen bulbs with a
GUIO base are available at specialty lighting
stores and home building centers.
.
Replace the outer trim ring by inserting the two
retaining tabs into the two tab slots, pressing the
ring flush with the surface of the hood insert and
twisting until reaching the lock position.
Advertisement
