Craftsman 917.248950 Owner's Manual page 6

CONTAINER MOUNTING
(See Fig. 3)
1. install one container to left side first, install another
container to center position and one in right position.
NOTE: Left edge of right container should always overlap
right edge of left container at center supports.
2. Close cover and lock latches over center support
tubes. To lock and release latches, pull back on latch
handles.
COVER LATCH
HANDLES
CENTER
SUPPORT
TUBES
CONTAINER
HANDLE
FIG. 3
LOWER CHUTE (See Fig. 4)
1. Raise and hold deflector shield in upright position.
2. Place slot in Iowerchute overtab on mowerand position
lower chute over mower opening as shown.
3. Hook rear latch into flange hole on back of mower.
4. Hook front latch into tab hole on front of mower.
_li CAUTION: Do not remove deflector
shield from mower. Raise and hold
shield when attaching lower chute
and allow it to rest on chute while in
operation.
TAB
DEFLECTOR
SHIELD
OPTIONAL FRONT
GAUGE WHEEL
FRONT
LATCH
REAR LATCH
FIG. 4
6