Dust Cup; How To Maintain - Eureka 96B Owner's Manual

HOW TO USE
Power Switch
1. Push the power switch down to turn on; push up to turn off.
2. Select type of cleaning. Carpet cleaning starts the brush roll turning. Bare floor cleaning
stops the brush roll.
Off
Floors
Carpets
Dual Uses
To operate as a
handvac remove
the handle by
releasing the lock
button.

HOW TO MAINTAIN

The instructions given in this booklet serve as a guide to routine maintenance. Keep the
cleaner operating at top efficiency. Empty the dust cup after each use.
Empty Dust Cup

Dust Cup

Latch
1. Slide dust cup
latch up.
2. Pull dust cup
from handle
section and lift
from the nozzle.
yy
yy
3. Pull the filter out of the
dust cup,
contents of dust cup into
a waste container. (To
clean dust cup filter refer
to dust cup
section.)
Nozzle with Edge Kleener
The nozzle turns down for regular or
low profile cleaning. Airflow under
the nozzle automatically directs
suction to the edges and corners for
maximum full width cleaning.
To operate as a stick vac
attach the handle.
4. To replace dust cup, fit
shake
dust cup down into
nozzle.
5. Gently squeeze the
filter
sections together until
the dust cup latch locks
the cup in place.
®
Lock
Button
7