How To Maintain Your Vacuum Cleaner; How To Maintain Dust Cup, Filters And Brushroll - Eureka NES510 Series Owner's Manual

How to maintain your vacuum cleaner

CAUTION
!
Never operate vacuum
cleaner without all filters,
filter screen and dust cup
in proper position.
WARNING: Moving parts!
Washable pre and post-motor filters - clean regularly
1. Release
latch
2. Pull out
To avoid unnecessary service calls, periodically check brushroll for debris. If brushroll gets clogged
it will automatically shut off. Turn vacuum off and unplug before attempting to remove clog.
!
Make sure vacuum cleaner is turned off and not
plugged into a power source.
WARNING: Do not attempt to remove belt.
Call the Eureka Customer Service HELPLINE
at 1-800-282-2886.
2
If debris cannot be removed easily, remove retainer to access
brushroll. Using flathead screwdriver or coin turn screws to the
'unlock' position. Remove the brushroll and clear any tangled hair
and remaining debris.
1. Release
latch
Click the dust cup release button, located
on the bottom of the dust cup to detach it
from the unit, and pull dust cup out.
How to maintain brushroll
Washable brushroll – clean frequently
CAUTION
Dust cup – Empty after each use
2. Pull out
1. On front of hand vac, locate the latch
and pull to remove plate and take out
pre-motor filter. Just below the cord on
the back of the hand vac, locate the
latch to remove the vented plate and
take out post-motor filter.
24h
1
Step on floor nozzle to lower handle. Turn vacuum face down
on floor. Use scissors to clip heavy threads or strings.
3
To reassemble:
1. Align one end of brushroll with floor nozzle gear.
2. Press other end into slot.
3. Place retainer back in place and put in screws and turn to
'lock' position.
Use handle on top of dust cup to remove
lid, empty dust cup and replace lid.
2. Lift out pre-motor filter and shake
off dust frequently. Rinse filter and
dry THOROUGHLY.
3. Reattach filters.
4. Click corresponding plates back
into place.
www.eureka.com
9