Fedders A6P09S2B Instruction Manual page 4

"-INSTALLATION
WlNDDW & MDBILE INSTALLATIDN
%
J
Window Adapter Application
1
Tc°A_l_tione r
Exhaust Nozzle Exhaust Tube
Tube Adapter
Window
Panel
Window Installation of Exhaust Tube
1. Attach Exhaust Tube Adapter to the Window Panel with
four Screws (supplied). Make sure that panel is extended
so that screws do not go into sliding portion of panel.
2. Attach the Nozzle to the end of the Exhaust Tube by
turning it counter clockwise onto the tube.
3. • Open the window.
Place the window panel in the window, extending it
to fit the width of the window. Once panel is
extended, the panel can be locked into this width by
tightening the two screws on the top panel. For
casement windows the panel may be installed
vertically with the adapter at the bottom.
• Close the window.
• Insert exhaust tube into window adapter.
4. Select Cool, or Fan mode. Do not use window adapter with
Dehumidification mode.
5. Select Fan Speed.
6. Adjust thermostat.
Maintain a clear distance (from walls, furniture, etc.) of at
least 10 inches around the unit to allow proper air circulation
and prevent damage to the unit.
Mobile Installation
Mobile Installation of Exhaust Tube
1. Place the nozzle in the exhaust tube.
2. Open the door slightly and position the nozzle
between the door and the door jamb.
Important: Do not over-stretch the exhaust tube or make
any unnecessary bends in it.
Leave at least 10 inches of unobstructed space behind the
unit.
4