Advertisement
ATTACHING
DETHATCHER
TO TRACTOR
•
If the front of your tractor has front mounting holes as
shown in figure 7, continue on to figure 8.
If the front of your tractor DOES NOT have front
mounting holes, go to figure 9.
FRONT
Remove two self threading bolts (if present) from
front cross-member
of tractor. Assemble bolts through
lower slots in hitch bracket, then reinstall them back
into front crossmember. (Make sure notches at top of
hitch bracket and crossmember
are aligned.)
From behind tractor's front crossmember, insert two
3/8"x 1" hex bolts (3) through holes in crossmember
and through upper slots in hitch bracket. Secure with
two 3/8" nylock hex nuts (12).
Go to figure 11 on page 7.
SELF THREADING
BOLT
12
SELF THREADING
BOLT
FRONT
\
19
3
m
FIGURES
9 AND 10 ARE ONLY FOR TRACTORS
WITH NO FRONT MOUNTING
HOLES.
FOR
ALL OTHER
TRACTORS
CONTINUE
TO FIGURE 11.
m
[z
Advertisement
