Table of Contents
Advertisement
General Care & Cleaning
CLEANINGTHE BURNERGRATES,BURNERCAPSAND
BURNERHEADS
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The Grates, Burner Caps and the Large 18k Burner Head should be routinely cleaned.
Keeping the burner ports clean will prevent improper ignition and an uneven flame. If
needed, the fixed burners should be cleaned in place with an humid cloth (do not spraw
water on them).
Refer to the following instructions:
To Remove and Replace the Surface Burner Grate, Surface
Burner Cap and Surface Burner Head - Remove in the
following order; (1st) Surface Burner Grate, (2nd) Surface
Burner Cap, (3rd) Surface Burner Head (See Figure 1).
Reverse the procedure above to replace the Surface Burner
Cap, Surface Burner Head and Surface Burner Grate. Do
not remove any burner parts from the cooktop until the
burner parts have completely cooled and are safe to
handle.
Do not operate the surface burners
without
the
Surface Burner Heads, Surface Burner Caps and
Surface
Burner
Surface
Burner
Cap
Hide quick links:
Advertisement
Table of Contents
