Table of Contents
Advertisement
Surface Cooking
LOCATIONS O FTHEBURNERS
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
The 30" cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See Figure):
a 5 000 BTU (natural gas) burner located at the right rear position;
a 18 000 BTU (natural gas) burner located at the left rear position;
a 9 500 BTU (natural gas) burner located at the left front position;
and a 14 000 BTU (natural gas) burner located at the right front position.
The 36" cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows (See
Figure):
a 5 000 BTU (natural gas) burner located at the right rear position;
two 9 500 BTU (natural gas) burners located at the left front and left
rear positions;
a 18 000 BTU (natural gas) burner located at the center position;
and a 14 000 BTU (natural gas) burner located at the right front
position.
[]
[]
[]
[]
[]
30" cooktop
36" cooktop
i
P CEMENT OF BURNERHEADSAND CAPS
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
For the 18 000 BTU burner :
Place the burner head over the gas orifice (Figure 1). Be careful not to damage the
electrode
while placing
the burner head over the orifice.
Make sure electrode fits
correctly into slot in burner head.
Burner Cap
For all burners:
_/_S
Place a burner cap on each burner head
(see Figure 2), matching the cap size to the
head size. The cap for each burner has an
inner locating ring which centers the cap
_
Cap
correctly on the burner head. Be sure that
Burner
//
all the burner caps and burner heads are
Head
correctly placed BEFORE using your
appliance.
Make sure each burner cap is properly
aligned and level.
Turn the burner on to determine if it will
light. If the burner does not light, contact a
Service Center. Do not service the sealed
burner yourself.
ing
Figure1
Figure2
Hide quick links:
Advertisement
Table of Contents
