Accessories; Extension Cords; Blades - Craftsman 320.28223 Operator's Manual

The following recommended accessories are currently available at Sears stores
and other selected Craftsman outlets..
,_ WARNING: The use of attachments or accessories that are not
recommended might be dangerous and could result in serious injury.
EXTENSION CORDS:
The use of any extension cord will cause some loss of power. To keep the loss
at a minimum and to prevent overheating, use an extension cord that is heavy
enough to carry the current that the tool will draw.
A wire gauge (AWG) of at least 14 is recommended for an extension cord 25 feet
or less in length. When working outdoors ALWAYS use an extension cord that is
suitable for outdoor use. The cord's jacket will be marked WA.
CAUTION: Keep extension cords away from the cutting area and position the
cord so it will not get caught on lumber, tools, etc. during the cutting operation.
WARNING: Check extension cords before each use. If damaged, replace it
immediately. Never use a tool with a damaged extension cord because touching
the damaged area could cause electrical shock resulting in serious injury.
BLADES
Craftsman has a large selection of jig saw blades for fast, efficient cutting in a
variety of materials and applications
6-in. long, 7 teeth per in
3-1/8-in. 10 teeth per in
2-3/4-in. 20 teeth per in.
3-5/8-in. 10 teeth per in.
3-1/2-in. 8 teeth per in
2-3/4-in. 20 teeth per in.
3-5/8-in. 10 teeth per in.
3-5/8-in. 6 teeth per in.
2-3/4-in. 12 teeth per in.
Fast-cutting wood Blade
long, Fine scrolling in wood
long, Super-fine wood scrolling
long, Super-fine wood scrolling
long, Wallboard, plaster
long, General metal cutting
long, Bi-metal; general wood
long, Bi-metal; fast-cut wood
long, Bi-metal; general metal
3-in. long "Knife-edge"-Iinoleum, rubber, leather
;raftsman also offers Combination Squares, Framing Squares and various
length Edge Guides to help you with all your cutting needs.
28223 Manual_Revised_S0 03S0 Page 30