Additional Rules For Safe Operation - Craftsman 320.28223 Operator's Manual

ADDITIONAL RULES FOR SAFE OPERATION
,_ WARNING: Be sure to read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock, fire and/or serious
personal injury.
• Know your power tool. Read operator's manual carefully. Learn the
applications, as well as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock, fire or serious injury.
• Always wear safety glasses or eye shields when using this saw. Everyday
eyeglasses have only impact-resistant lenses; they are not safety glasses.
• Protect your lungs. Wear a face mask or dust mask if the operation is dusty.
• Protect your hearing. Wear appropriate personal hearing protection during
use. Under some conditions noise from this product may contribute to
hearing loss.
• All visitors and bystanders must wear the same safety equipment that the
operator of the saw wears.
• Inspect the tool cords periodically and if damaged have them repaired
at your nearest Sears Parts & Repair Service Center. Be aware of the
cord location.
* Always check the tool for damaged parts. Before further use of the
tool, a guard or other part that is damaged should be carefully checked to
determine if it will operate properly and perform its intended function. Check
for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation. A guard or other part
that is damaged should be properly repaired or replaced at a Sears Parts &
Repair Service Center.
* Inspect and remove all nails from lumber before sawing.
* Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If someone borrows this tool, make sure they
have these instructions also.
28223 ManuaLRevised_10 0310 Page 10