Operation; Turn Power On/Off When Using The Barrel Grip; Product Specifications - Craftsman 320.28223 Operator's Manual

PRODUCT SPECIFICATIONS
Input 6 Amps
Laser Diode Type Red Laser Diode 650 nm
Laser Class Class Ilia, power output<2.5 mW
No load Speed 800-3000 SPM
Rating 120 volts, 60Hz AC
Cutting angle range 0-45 ° left and right
Cutting depth in wood 3-3/8" (85mm)
Cutting depth in steel 1/4" (6mm)
Weight 6.15 Ibs (2.79 kg)
_, CAUTION: The blade guide supports the blade when cutting and must at
all times rest against the back edge of the blade, except when in the scrolling
mode. It should rotate freely.
TURN POWER ON-OFF WHEN USING THE BARREL GRIP (Fig. 3)
1. Connect the power cord
of your saw to a standard
household power outlet.
2. Turn your saw on by
sliding the push-on switch
forward until it clicks into
the start position.
3. To turn power off, press in on
the rear section of the push-
on switch to stop the tool.
Fig. 3
28223 Manual_Revised_S0 0310 Page 14