Available Accessories; Unpacking And Checking - Craftsman REXON 137.229171 Operator's Manual

AVAILABLE ACCESSORIES UNPACKING AND CHECKING
CONTENTS
Use only accessories recommended for this drill press.
Follow instructions that accompany accessories. Use of
improper accessories may cause hazards.
Visit your Sears Hardware Department or see the Sears
Power and Hand Tool Catalog for the following
accessories:
Drill bits
• Hold-Down and Guide
• Drill Press Vises
• Clamping Kit
If any part is missing or damaged, do not plug the drill
press in until the missing or damaged part is replaced,
and assembly is complete.
Carefully unpack the drill press and all its parts, and
compare against the list below.
To protect the drill press from moisture, a protective
coating has been applied to the machined surfaces.
Remove this coating with a soft cloth moistened with
kerosene or WD-40.
rT._kVlV/_,1-1 _II_It"..]
Use only accessories designed for this drill press to avoid
injury from thrown broken parts or workpieces.
Sears may recommend other accessories not listed in
this manual. See your nearest Sears store or Power and
Hand Tool Catalog for other accessories.
Do not use any accessory unless you have completely
read the instruction or owner's manual for that accessory.
To avoid fire or toxic reaction, never use gasoline, naphtha,
acetone, lacquer thinner or similar highly volatile solvents
to clean the drill press.
ITEM DESCRIPTION QUANTITY
A. Head assembly
B. Table
C. Base
D. Column assembly
Loose parts bag:
E. Feed handles
E Lock handle
G. Crank handle
H. Hex bolts
I. Fence assembly
J. Triangle knobs
K. T-Block
L. Washer
M. Hex wrenches
N. Wedge
O. Arbor
Box:
P. Chuck key
Q. Chuck
1
1
1
1
3
1
1
4
1
2
2
2
3
1
1