Smart Control Panel Setup - Craftsman 139.3043 Owner's Manual

Smart ControlPane/Setup
MENU NAVIGATION
The features on the door control can be programmed through a
series of menus on the screen and the navigation buttons. Refer
to the descriptions below.
Screen
The main screen displays the time, temperature, and current
battery charge (if applicable).
Settings
Press the navigation button below the down arrow till you see
TEMPERATURE to view the Settings menu.
Navigation Buttons
Features
Press the navigation button below "MENU"to view the Features
menu.
TEMPERATURE: Display the temperature in Fahrenheit or Celsius
and show/hide the temperature.
LANGUAGE: S elect a language (Engfish, French, or Spanish).
LIGHT SETTINGS:Set duration for garage door opener fight to
stay on after operation, se/ectab/erange of 1-1/2 to 4-1/2 minutes.
Turn the Motion sensor off/on, and turn the entry tight feature
off/on.
CLOCK SETUP:Set the time, choose 12 or 24 hour clock and
show/hide dock.
CONTRAST: A djust the contrast of the screen.
To program a remote control or keyless entry to the garage door
opener using the door control see page 34.
TTCSETTINGS(FOR SECTIONAL DOORSONLY): Set the
Timer-to-Close feature off/on and set the time interval before door
doses. NOTE:DO NOT enable TTCff operating a one-piece door.
TTCis to be used ONLY with sectional doors.
LOCK:Enable/disablelock.
PROGRAM: Add remote controls, AssureLink
TM
devices, an extra
remote button to control your garage door opener fights, or a
key/ess entry.
33