Product Specifications; Unpacking - Craftsman 315.212240 Operator's Manual

12 in. compound miter saw double insulated
Table of Contents

Advertisement

Blade Diameter
12 in.
Blade Arbor
5/8 in.
No Load Speed
4000 RPM
Rating
15 Amperes
Input
120 Volts, 60 Hz, AC Only
Net Weight
41 Ibso
Cutting Capacity with Miter at 0°/Bevel 0°:
width x height
7-7/8 in. x 2-1/2 in.
Cutting Capacity with Miter at 45°/Bevel 0°:
width x height
5-1/2 in. x 2-1/2 in.
Cutting Capacity with Miter at 0°/Bevel 45°:
width x height
7-7/8 in. x 1-3/4 in.
Your Compound Miter Saw has been shipped
completely assembled except for the accessories,
blade, miter lock handle, and dust guide or dust bag.
_I,
WARNING:
If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
Remove all loose parts from the carton. Separate
and check with the list of loose pans. See Figure2.
Remove the packing materials from around your
saw.
Carefully lift saw from the canon and place it on a
level work surface. This saw is heavy. To avoid
back injury, get help when needed.
Do not discard the packing materials until you have
carefully inspected the saw, identified all loose
parts, and satisfactorily operated your new saw.
Your saw has been shipped with the saw arm
locked in the down position. To release saw arm,
push down on top of saw arm and pull out the lock
pin. See Figure 4.
Hand pressure should remain on the saw arm to
prevent sudden rise upon release of the lock pin.
Examine all parts to make sure no breakage or
damage has occurred during shipping.
If any pans are damaged or missing, do not attempt to
plug in the power cord and turn the switch on until the
damaged ormissing
parts are obtained and are
installed correctly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents