Timer - Nokia Mediamaster 9802 S Owner's Manual

MAIN MENU
Conditional Access
This menu will only be activated if you have inserted a valid Smart-
card in the slot behind the front lid.
If more than one CA system is activated, select the one from
which you want information.
The Viaccess Conditional Access (CA) System is embedded in the
Mediamaster. A Smartcard that supports this standard can be
used in the left slot on the front panel.
Different CA modules (with their Smartcards) supporting the DVB
Common Interface (CI) standard can be used in the right slot.
Viaccess embedded
From here you get subscription information from a Smartcard
supplied by a Viaccess Service Provider.

Timer

General
You can program the Mediamaster to start and stop at a
predefined time.
The function is very useful when you want to record a programme
and you are unable to start/stop the recording event yourself.
Or when you just want to be reminded of the start of a pro-
gramme you do not want to miss.
The display on the box will indicate "t
nel number) during recording/while you are watching a pro-
gramme started by the Timer function.
Furthermore, a programme that has been started by the Timer
function will lock the box. You can not change channels or call up
a menu the normal way until the stop time is reached.
However, you can unlock the box by pressing the MENU button
(about 5-10 seconds) until a channel number appears in the dis-
play. Please note,that this is the only recommended way * to un-
lock the box as long as "t
* Apart from pulling the plug from the mains, which is not to
recommend!
x" (where x is the chan-
x" is visible in the display.
GB 43