Craftsman 126.32563 Operator's Manual page 35

allow the Cutting Head to be locked in the
down position by the latching pin.
The Cutting Head may not lockin the down
postionwith the depth stop plate deployed.
[,_ WARNING I
LOWER BLADE GUARD
Do not use the saw if the Lower Blade Guard is
damaged or not operatingcorrectly.A damaged or
non-functioningguard must be replaced beforethe
saw is used. A replacement guard must be tested
for efficient and safe operationwith the machine
disconnected from the power source.The guard
operates automaticallyas the Cutting Head is
raised or lowered.
35