Craftsman 320.21228 Operator's Manual page 4

_lk WARNING: Be sure to read, understand and follow all Safety rules and
operating instructions in this Manual before using this tool. Failure to do so may
result in electric shock, fire and/or serious personal injury.
SAFETY PRECAUTIONS FOR LASERS
This Miter Saw has a built-in laser light. The
laser is ClasslllA and emits output power
of a maximum 2.5mW and 635-655nm
wavelengths. These lasers do not normally
present an optical hazard. However, DO
NOT stare at the beam, as this can cause
flash blindness.
Class Ilia Laser Product
Complies with 21 CFR parts 1040.10 and 1040.11
AVOID EXPOSURE t
Laser radiation is emitted through
this aperture
,_ CAUTION: The following label is on the tool. It indicates the location from
which the saw emits the laser light. BE AWARE of the laser-light location when
using. Always make sure that any bystanders in the vicinity of use are made
aware of the dangers of looking directly into the laser.
• Do not remove or deface any product labels. Removing product labels
increases the risk of exposure to laser radiation.
• The laser beam can be harmful to the eyes. Always avoid direct eye
exposure. Do not look directly into the laser-beam-output aperture during
operation. Do not project the laser beam directly into the eyes of others.
• Turn the laser on only when making cuts.
• The laser on the Miter Saw is not a toy. Always keep it out of the reach
of children.
• The laser light emitted from this device should never be directed toward any
person for any reason.
• Be sure that the laser beam is aimed at a workpiece (such as wood or a
rough-coated surface) that does not have a reflective surface.
• Do not use on materials, such as sheet steel, that have shiny, reflective
surfaces. The reflective surface could reflect the beam back at the operator.
Be aware that laser light reflected off of a mirror or any other reflective
surfaces can also be dangerous.
• Always turn the laser generator off when it is not in use. Leaving the tool on
increases the risk of someone inadvertently staring into the laser's beam.
• Always wear laser-protective eyewear when working on or near
reflective surfaces
_, CAUTION: always follow the instructions contained in this manual when using
this laser. Use of this feature in any manner other than which is directed in this
manual may result in a hazardous radiation exposure.
21228 Manual Revised 08-0307 Page 4