Craftsman 320.21228 Operator's Manual page 19

3. Grasp the other bar and lift the Tabletop Assembly, as shown in Fig. 5.
'Fig. _4 F_ig.
I
4. Continue to lift the Tabletop Assembly while the Base remains in place on the
floor, as shown in Fig.6.
5. Continue to lift the Tabletop Assembly until it is completely vertical (Fig. 7).
6. Hold the Base Bar Legs (as shown) by placing a foot on the Base Bar. Pull
the Tabletop Assembly straight up until the Chrome Extension Bars attached
to the Tabletop Assembly (4) are fully extended. Be sure that the Chrome
Extension Bars lock in place (Fig. 8).
7. With one foot still on the Base Bar, grasp the Support Bar (8) and pull it up
until the Chrome Extension Bars are also fully extended and lock in place.
Pull the legs further apart to form an "X" (Fig. 9).
21228 Manual Revised 08-0307 Page 19