Replacing A Memory Module - Lenovo ThinkPad X130e User Manual

(english) user guide
Hide thumbs Also See for ThinkPad X130e:
Table of Contents

Advertisement

8. Slide the solid state drive or hard disk drive firmly into the connector
9. Put the cover back in place
10. Reinstall the battery. For information about how to reinstall the battery, refer to "Replacing the battery"
on page 71.
11. Turn the computer over again. Reconnect the ac power adapter and all cables.

Replacing a memory module

Before you start, print these instructions.
To replace a memory module, read the following prerequisites, and then the instruction.
Note: The operating speed of the memory module depends on the system configuration of your computer
and its combination with the memory module installed on your computer. In some conditions, the memory
module in your computer might not be able to operate at the maximum speed.
Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. The static electricity could damage the memory module.
76
User Guide
1
and close the cover
2
1
, and then reinstall the screws
. Then tighten the screws
2
.
3
.

Advertisement

Table of Contents
loading

Table of Contents