Lenovo ThinkPad X130e User Manual page 129

Table 3. Config menu items (continued)
Menu item
Beep and Alarm
Serial ATA (SATA)
CPU
Submenu item
CPU Power Management
Power Control Beep
Low Battery Alarm
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Core Multi-Processing
Intel Hyper-Threading
Technology
Selection
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Enabled
• Disabled
• Compatibility
• AHCI
• Disabled
• Enabled
• Disabled
• Enabled
Chapter 8
Comments
Enable or disable the power
saving feature that stop
the microprocessor clock
automatically when there
are no system activities.
Normally, it is not necessary
to change the setting.
If this function is enabled,
a beep sounds when the
computer enters a power
management mode, when it
resumes operational mode,
and when the ac power
adapter is connected or
disconnected.
Enable or disable the low
battery alarm.
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will be
sounded when the entered
password matches or does
not match the configured
password.
Enable or disable keyboard
beep when unmanageable
key combinations are
pressed.
Defines SATA controller
operation mode. If you
select "Compatibility
mode", serial SATA
controller operates in
compatibility mode.
Enable or disable additional
execution core units within
a CPU.
Note: If you are using a
computer with a single-core
processor, this item does
not appear.
Note: For Core
Multi-Processing, refer
to the instructions in
"Installing Windows XP" on
page 102.
Enable or disable additional
logical processors within a
processor core.
.
Advanced configuration
113