Lenovo ThinkPad X130e User Manual page 128

Table 3. Config menu items (continued)
Menu item
Keyboard/Mouse
Display
Power
112
User Guide
Submenu item
Fn and Ctrl Key swap
Fn Key Lock
Boot Display Device
®
Intel SpeedStep
technology (Intel
SpeedStep mounted
models only)
Selection
• Disabled
• Enabled
• Disabled
• Enabled
• ThinkPad LCD
• Analog (VGA)
• Digital on ThinkPad
• Disabled
• Enabled
Mode for AC
• Maximum Performance
• Battery Optimized
Mode for Battery
• Maximum Performance
• Battery Optimized
Comments
settings to enable the
Always On USB connector
function. For details
about how to enable the
Always On USB connector
function, refer to the online
help of the Power Manager
program.
If you select "Enabled," the
Fn key works as the Ctrl
key, and the Ctrl key works
as the Fn key.
Note: Even when
"Enabled" is selected,
you need to press the Fn
key to return the computer
from sleep mode to normal
operation.
If you select "Enabled,"
you can press the Fn key
to keep it in a pressed
condition, then press the
desired function key. The
action is equivalent to
pressing the required
key and the Fn key
simultaneously. When
you pressed the Fn key
twice, the state is locked
until you press the Fn key
again.
Select the display device
that is to be active at boot
time. This selection is
effective for boot time,
password prompt, and
ThinkPad Setup.
"Digital on Thinkpad" is
HDMI on your computer.
Select the mode of Intel
SpeedStep technology at
runtime.
Maximum Performance:
Always highest speed
Battery Optimized: Always
lowest speed
Disabled: No runtime
support, lowest speed
Note: This sub-menu is not
supported in AMD models.