When Using Unix - Oki MPS930b User Manual

W U U
HEN SING NIX
The printer is not Printing
CAUSE
Incorrect IP
address.
Error occurs on the
network connecting
the workstation
and the printer.
Unable to set the
correct printer
entry on the
workstation.
The printer is in the
offline status.
If LPD spool is set
to [On], the print
data sent by the
user in a single
print instruction
has exceeded the
remaining storage
capacity of the
destination device.
An irrecoverable
error has occurred
during print.
VERIFICATION
Ask the network
administrator to
check if the IP
address is
correct
Activate the
network test
mode (ping) on
the workstation
to check the
communication
status.
Check and
correct the
printer entry
settings on the
workstation.
Check the/etc/
printcap file on
the workstation
or use the lpstat
command to
troubleshoot.
Check whether
Off-line is
displayed on the
printer Operator
Panel.
Check the
remaining
storage capacity
of the
destination
device.
Check the error
message on the
printer Operator
Panel.
MPS930b User's Guide> 123
ACTION
Set up the correct IP address for the
printer.
As the network administrator to look
into the network failure.
Re-enter the correct printer entry.
Press the <ON LINE> button.
1. If single print data has exceeded the
storage capacity of the destination
device, free space on the device, or split
the file into smaller ones to keep them
below the remaining storage space
2. If multiple files have exceeded the
storage of the destination device,
reduce the number of files which can be
sent at a time.
Switch off the printer, then switch it on
again.