Oki MPS930b User Manual page 98

PARAMETER
TUMBLE/tumble
SIMP/simp
NOTE
> If several parameters are specified in one "lpr" command,
data may not be printed correctly.
> The system default is used if no parameter is specified.
> If the print data specifies 2 sided or 1 sided printing, the
specification by the data becomes valid and overrides that
by -C option.
Specifying Paper Size and 2 sided Printing
Select a paper size and a binding type. The following parameters can
be specified:
PARAMETER
A4D/a4d
A4T/a4t
A5D/a5d
A5T/a5t
B5D/b5d
B5T/b5t
NOTE
> If several parameters are specified in one "lpr" command,
data may not be printed correctly.
DESCRIPTION
2 sided printing as follows:
1 sided printing
DESCRIPTION
2 sided printing on A4 paper and long-
side binding
2 sided printing on A4 paper and short-
side binding
2 sided printing on A5 paper and long-
side binding
2 sided printing on A5 paper and short-
side binding
2 sided printing on 85 paper and long-
side binding
2 sided printing on B5 paper and short-
side binding
MPS930b User's Guide> 98