Power Saver Modes; Exiting Power Save Mode - Oki MPS930b User Manual

P S M
OWER AVER ODES
This printer is equipped with a Power Save mode to reduce power
consumption when it is left idle. The default idle time from last print
activity until the printer enters Power Saver mode is 5 minutes. This
time can be adjusted by the operator to any of the following times:
5, 15, 30, 60, or 120 minutes.
When no print data is received within 5 minutes (default) since the
last page is printed, the printer will enter Power Saver mode. An
informative message will appear on the operator panel indicating
Power Saver Mode. In this mode, the printer allows the fuser to cool,
but power is still supplied to the mechanical parts of the printer.
Consumption of power during Power Saver mode is 50 Watts or less,
and the time required to exit from Power Saver mode to a print-
ready status can be up to 45 seconds.
There is a second stage of power reduction called Sleep mode. The
default idle time from last print activity until the printer transitions
from Power Saver mode to Sleep mode is 30 minutes. This time can
be adjusted by the operator to any of the following times: 30, 60,
120, or 180 minutes. In this mode, the operator panel LCD is off and
the OnLine Light is flashing. In this mode, the printer will turn off all
power to the mechanical components of the printer and installed
options. Consumption of power during Sleep mode is less than 8
watts, and the time required to exit from Sleep mode to a print-
ready status can be up to 45 seconds plus the time to reinitialize
mechanical options.
E P S M
XITING OWER AVE ODE
When equipped with a duplex option, the B930 is qualified for the
®
ENERGY STAR . The ENERGY STAR TEC value for typical weekly
power consumption is 5,825 kWh/week for the 230V printer and
5,579 kWh/week for the 110V printer. If the times to Power Save or
Sleep mode are increased by the operator, the product will no longer
meet the power efficiency recommended for ENERGY STAR
qualification
MPS930b User's Guide> 61