Configuring As A Network Printer - Oki MPS930b User Manual

Once the protocol has been installed and configured in Windows, the
next step is to configure the TCP/IP parameters in the network
printer.
C
ONFIGURING AS A
Windows 95/98/ME
When printing using TCP/IP, the Oki LPR utility is the only option to
use. The following procedure should be used. When installing the
driver, ensure it is installed as a local printer and not a network
printer. Ensure the appropriate printer driver has been installed in
Windows.
Install the Oki LPR utility as described in "OKI LPR" on page 87 of
this manual and add the printer installed earlier.
Windows NT 4.0
With Windows NT 4.0, you have two options for printing using TCP/
IP. They are:
• Oki LPR
• Microsoft LPR
In order to use Microsoft LPR, it must first be installed into your
operating system.
NT 4.0 requires administrator privileges.
Oki LPR
Please follow the procedure described in the Windows 95/98/Me
section "OKI LPR" on page 87.
Microsoft LPR
To install this port, the following needs to be carried out.
1. Select [Start], [Settings], [Control Panel] and then select
[Printers].
2. Select [Add Printer] Wizard.
3. Select [My Computer] and then [Next].
4. Select [Add Port].
5. Select [LPR Port] and then [OK].
N P
ETWORK RINTER
MPS930b User's Guide> 81