Oki MPS930b User Manual page 96

NOTE
> Any parameter other than below becomes invalid if
specified.
Selecting a Paper Tray
When selecting a paper tray, either the paper size or the tray itself
is specified. If the paper size is specified, the printer automatically
searches and selects the tray where the specified paper is loaded.
The following parameters can be specified:
PARAMETER
INTRAY1/intray1
INTRAY2/intray2
INTRAY3/intray3
INTRAY4/intray4
INTRAY5/intray5
INTRAY6/intray6
A4/a4
B5/b5
A5/a5
LETTER/Letter
LEGAL/Legal
NOTE
> If several parameters are specified in one "lpr" command,
data may not be printed correctly.
> The system default is used if no tray number is specified,
a specified tray is not loaded, or paper of a specified size
is not loaded.
> This option is for specifying a paper size only. Paper is
selected but the document size is not corrected according
to the paper size.
> If the print data specifies a paper tray, the tray
specification by the data becomes valid and that by the -C
option becomes invalid.
DESCRIPTION
Selects Tray 1
Selects Tray 2
Selects Tray 3
Selects Tray 4
Selects Tray 5
Selects Tray 6
Selects the tray where A4 paper is loaded.
Selects the tray where B5 paper is loaded.
Selects the tray where A5 paper is loaded.
Selects the tray where Letter paper is loaded.
Selects the tray where Legal paper is loaded.
MPS930b User's Guide> 96